• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

The wall-mount electric fireplaces can be put to go right out of their box. They're ideal for adding ambience without venting or renovation.

However, they typically require careful installation since they're usually heavy. Follow these steps to hang your brand new electric fireplace properly.

1. Connect the Brackets

A wall-mounted or recessed fireplace instantly enhances the appearance of any room. This is an excellent option for those who don't have fireplaces or reside in apartments.

Choose the location where you'd like to place your electric fireplace. You should select a spot that isn't susceptible to moisture and is at a minimum, a few feet away from furniture and drapes. Once you've located a location to mark the wall, you can use layout marks for the top and bottom plates of the fireplace frame.

Use a drill or similar tool to drill exploratory holes into the wall. Examine for studs with an stud-detector. Then, mark the drywall with the location of the brackets for mounting your fireplace. Then, you can build the wall or patch and paint the drywall to prepare it for fireplace installation.

Depending on the type of wall-mounted fireplace, you could have to either install the screen and firebox as one unit or separate them using an adjustable wall bracket. If you're unsure about your capability to tackle this part of the project on your own, you might consider hiring an experienced general contractor or carpenter.

There is a template included with most electric fireplaces. However, you should also keep a level in your pocket and a pencil to mark out the exact location where the wall brackets will be installed. Before drilling, make use of the template to check that the fireplace's power cable is able to be able to connect from the installation site to an outlet near by to plug it in.

When the studs and fireplace frame are in place, you can then install the drywall as smooth and flush as you can for a sleek appearance. Install trim along the bottom edge and paint, sand and then finish the frame.

You will need to insert the slots or hooks on the back of most electric fireplaces mounted on walls into the brackets that mount them. Make sure to align the slots or hooks before connecting the brackets for your fire. Once the fire is installed, you can add additional elements like driftwood logs crystal embers, or decorative rocks.

2. Check the Bottom Bracket

The space above a fireplace mantel, chimney breast or mantel is prime real estate to hang artwork. There is a fine balance between an artistic arrangement and one that detracts the overall look of the fireplace.

A common rule of thumb is that a picture should cover 80percent of the width of the fireplace or mantel it's placed on. This will help it remain proportionate and appear attractive on the wall. This rule of thumb could be affected by other ornaments or decorative items on the mantel.

If you plan to display a photo above your electric fire the frame must be constructed of glass or a material that can handle high temperatures. If you're not sure whether the frame is suitable, you can test the frame with a heat sensitive cloth to determine if it is suitable for this purpose.

The risk of damaging artwork through smoke and stray heat is a common concern when displaying pictures on the flames of a fireplace. This is not a problem with a wood- or gas-powered fireplace. However should you decide to install an Electric Fireplace Wall Mounted wall-mounted fire, it's important to check the instructions of the manufacturer.

Most electrical fires have an attached bracket that can be fixed to the wall using hanging screws or wall-mounted fixing systems. If the latter is the case, it's recommended that you drill exploratory holes in a discrete part of the wall before you attempt to mount your electric fire. You can then utilize a pipe and cable finder to make sure there aren't any pipes or cables near the position of mounting.

If you have a problem, you can then decide to place your fire above the electrical socket or relocate it to a different spot. If you choose to move it to a new spot, you'll need to ensure that the power cable can be able to connect from the fire to the electrical outlet - this is crucial for older homes or homes with solid walls. Otherwise, your electric fire won't be able to work properly. Some models come with templates that show you the locations to drill holes, while others require you to use an apex level and pencil to mark the location on your wall.

3. Connect the Power Cord

It is possible to relocate your plug socket to the back of the unit if you have installed a fireplace with a recess. This can create a more elegant appearance. First test the fireplace to ensure it functions properly.

The third way to mount an electric fireplace is by framing the space and constructing it into the wall. This gives you a traditional, finished look and allows the installation of a mantel. The owner's guide for your model will provide information on framing, wiring and the best in wall electric fireplace way to secure the fire place.

If you're ready for mounting your new wall-mounted electric fireplace, start by marking the location of installation with a marker or pencil. Use a carpenter’s level to make sure that the area of installation is flat and level. You can also employ a stud locater to mark the location of studs so that you can be certain that you're drilling into an area that is safe.

Use your electric drill after you've identified the location of installation to create holes for the bracket screws or hanging screws. Be sure to follow the exact instructions in the owner's manual for this step, particularly if you're installing the fireplace in a drywall. If you're unsure of how to go about it you can always consult a professional to do the installation for you.

A cable organizer kit can be used to conceal power cords. These kits typically include clips, sleeves or boxes to bundle cables. You can use wire snakes or fish tape to guide the cords. If you don't want to cut into your drywall then you can put in a power bridge kit for more secure and cleaner connections.

You can also disguise cords with paintable wire covers or by tacking them to the wall. Make sure to keep the cover or tacks away from the source of heat, however. This will prevent accidental contact and protect the cord.

4. Connect the adapter

A wall-mounted electric fireplace is a great option for home renovations or for those who don't have the space or money to put in a gas fireplace. They are simple to hang and come ready to use right out of the box. They can be a great alternative for those who are seeking a modern and stylish design or the warmth fireplaces provide. They are designed to be hung like artwork on any wall. They can be recessed, or not recessed at all and come with a fan-powered heating.

Before beginning the actual installation process it's recommended to make a list of all the equipment and tools you'll require. Check the user manual for specific instructions about how to install your electric fire. Some models will require you to attach the brackets directly to the wall fitted electric fires while others might include a mounting plate that is able to slide into slots or hooks attached to the brackets used for mounting. It is important to remove any combustible materials from the area in which you are installing a recessive unit. In general it is recommended to keep these materials at a minimum of 3 feet away from the front of the fireplace.

After you've checked all the parts, you should plug in your electric fireplace and ensure that it is working correctly. This is an essential step, as it will ensure the flame effect screen and heater operate exactly as they were intended to. This will give you an idea of the final product's final configuration.

Cover the cord when you are confident that it's functioning properly. This will help keep the finished product neat and neat. This can be achieved by installing a new outlet that has an outlet cord that can be hidden behind the unit. This will give your fireplace a seamless finish.