• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window repair is broken it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. However when you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to find some plastic spacers to assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is substantial, you may want to use an alarm system that includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. Then, window repairs remove both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you cannot reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible so that your upvc window repair windows are waterproof and safe from drafts.

UPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and perform a test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if wake up every morning to discover mouldy walls and wet floors. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or window repairs missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It is essentially a very simple procedure, but it is easier if you have someone to help you hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrow on each hinge, this shows which way the window should open.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you suggestions.

It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also reduce the possibility of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. First, the hinges due to wear and tear can become misaligned, this causes a gap to form where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it's possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be positioned on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as you can.