• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When it's Time for Window Replacement

When old windows no longer improve the appearance of your home or shield it from the elements or block out noise it's time to upgrade windows. Where do you begin?

There are a myriad of factors to consider. We'll break down the factors to help you choose the best style, energy usage and cost, labeling, installation, and cost.

Energy Efficiency

Energy savings is one of the primary reasons homeowners invest in new windows. In reality replacing old, drafty windows can reduce cooling and heating costs by up to 20%. Some people are disappointed to discover that their savings in energy do not cover the initial cost of new replacement windows for a long time.

Window performance and operation should be a major consideration for any homeowner considering replacing their windows. A window that isn't functioning properly could increase your home maintenance costs, utility bills, and increase the possibility of air leaks. For instance windows that aren't able to move up and down or slide from side to side correctly may require replacement because the frames have become warped or swollen because of excessive moisture from condensation and/or lack of proper sealing.

Another sign that windows need to be replaced is the presence of mildew or mold inside and outside the frame. This is typically a sign of a failed seal or damaged weather stripping. If these issues are not taken care of promptly, the resulting mildew and mold could lead to health and safety problems for your family.

Replacement windows for new homes can enhance security for your home, curb appeal and resale value. These benefits are enhanced when the windows used in a renovation project are energy efficient, as stated by the National Fenestration Rating Council (NFRC).

The efficiency of windows is measured by their U-factor. The lower the U factor, the higher the insulating power of the window. A U-factor of less than 0.26 is a good guideline. Other than the U-factor factors to consider for energy efficiency are frame material and design. Vinyl is a strong low-maintenance option, however it can expand Double Glazed Replacement Windows and contract with temperature fluctuations, leading to leaks. Wood provides an elegant appearance and superior insulation, but it requires regular maintenance. Aluminum is a lightweight material that is easy to maintain, but it conducts heat quickly and is not a good insulator.

To get the best results from replacement windows, homeowners should employ a professional contractor to install windows. A professional can assist you choose the right windows that will fit your home's architectural design and climate zone. They can also provide information on the resale value of windows and homeowner satisfaction.

Style

New windows will always enhance the value of your home. However, when you begin to think about the styles, types and configurations that are available, it can get overwhelming. The choice isn't only about design or functionpicking the wrong windows can affect a home's selling value.

Window contractors have a few ways they can replace window handle windows that are old with more energy-efficient units, depending on the condition of existing frames. One option is a pocket replacement, in which contractors remove the exterior frame but leaves the interior trim and sashes. Another option, usually recommended for older homes or older areas with strict grille requirements or sash packs, is to use a sash pack replacement. These are kits that include aluminum clad or wood jamb liners and a replacement sash for the lower and upper parts of the window.

Another option is to install full-frame replacement windows. These will require the removal of the entire frame and the sash. This is recommended if the windows that are in use are damaged beyond repair. Full-frame installations are also recommended when homeowners want to change the type of window, for instance by replacing Double Glazed Replacement Windows (Www.Huenhue.Net)-hungs with sliders or cases.

When purchasing replacement windows, look for those with the NFRC label, which shows the window's energy efficiency rating. The higher the rating the more efficient the window.

Take off the stops that secure your window before installing the new one. Carefully work around the sill of your existing frame to ensure that you don't scratch the wood. If needed, shim it. Once the window has been installed then shim the top and bottom edge to ensure a secure fit. Apply caulk to the outside edge of the window to ensure it is sealed.

If your window does not fit perfectly in the opening, use foam-rubber backer rods to fill any gaps that are larger than 1/4 inch (0.64 cm). This is a better option instead of caulk, which can hold moisture and lead to mold and wood rot. If you have gaps wider than this, screw 1 inch (2.5 cm) furring strips to the sides of the existing frame to increase the height.

Budget

Window replacement is a significant investment but the energy efficiency and improved home comfort it brings makes it worth the initial expense. It also increases the value of your house and reduce utility bills. Before you begin your project, you need to create a budget to guide your spending decisions. To help you decide on the amount, think about your household's energy needs and the style of windows you'd like to install. A reputable contractor can provide you with an understanding of your costs beyond your own personal goals, and offer solutions to reduce them.

The material of the window frame is a significant element in determining the replacement window cost. Aluminum and vinyl frames are the cheapest options, while wood and composite frames will cost more. Consider the advantages and disadvantages of each frame type to help you determine which one is suitable for your home. Wood windows, for instance, are more durable, offer better insulation, however they require regular maintenance and are vulnerable to moisture damage. Aluminum and vinyl windows are less expensive however they're susceptible to rust and don't provide the same level of insulation as wood.

Your window replacement company can provide a variety ways to install windows that affect cost overall. The most labor-intensive is complete frame replacement, where the entire window is removed and replaced with a brand new unit. This is usually advised when the frames have begun to rot or are damaged, and it's often required for old-fashioned renovation projects. Insert windows is a cheaper option. In the process, the current sash, operating hardware and exterior trim are removed. However the exterior trim and siding remain intact. The new window unit will be placed in the opening, insulated and sealed.

If you're doing the work yourself, make sure you factor in the cost for the equipment. A tape measure, a shim made of waterproof material and caulk gun are all essential. Make sure you buy shims with different thicknesses so that you can accommodate the various sizes of your window sills as well as head jambs. You'll require elastomeric sealant to fill in any gaps between the frame and casing.

Installation

Windows are available in a variety of sizes and shapes to suit the unique architectural style of each home. The options include double-hung, single-hung sliding, bay bow, casement, circle, garden, awning, jalousie and egress windows. These windows are available in many different materials and finishes. Some are also insulated to improve energy efficiency.

Replace your old, inefficient windows with energy-efficient double-hung windows to save money. The process is simple however it's worth the effort. In addition to the savings in cost, you will enjoy the benefits of a brand new beautiful, elegant window.

Before you install your new window, take out the screen and sash from the current frame. This will make it easier to move the window of the frame, and also prevent damage to the materials. Once the window has been slid into place it's time to apply caulk along both sides of the frame and in the gap if any, using the caulk recommended for windows and doors.

Depending on your preferences and the condition of your existing frame, you may choose to use plastic or cedar shims to make sure that the window is placed correctly in the opening. Be cautious not to over-shim your window, however, as this could cause condensation and water to build within the frame, which can cause deterioration of the frame.

Your installer will ensure that the frame is level, plumb and fully caulked after the window is installed. Reinstall any interior trim removed to allow for the window. Paint or stain the new window to be in keeping with the color scheme of your home. Seal and insulate your sill jambs, and flanges on the exterior of your house for improved window performance.