• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving your vehicle with the original keys. Our most recent immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered to begin the engine.

Ghost, unlike trackers, does not emit radio frequency signals and cannot be detected by diagnostic tools. There are also no LED indicators or buttons giving away its presence within your vehicle or van.

Anti-key Cloning

The ghost immobiliser was designed to combat key hacking and cloning. This device connects with your vehicle's data network CAN and creates a unique pin code by using the factory buttons on your dashboard and steering. This prevents the thief being able to start your vehicle. If the incorrect PIN is entered, it will stop your engine from running which makes it impossible for you to drive away with your pride and Joy.

Ghost immobilisers are new technology that is extremely difficult for thieves to beat. The ghost immobiliser unlike physical deterrents, like wheel locks and steering locks that are able to be cut, is a discreet electronic device. It can't even be identified by thieves since it doesn't emit radio signals and is operated in a silent manner.

This next-generation immobiliser will protect your car against a variety of threats, including key hacking, relay attacks and duplicate copies. It is also able to stop thieves from acquiring an additional key or replacing your ECU in the sense that it will not allow them to start your car without entering the correct PIN code first.

The ghost immobiliser 2, unlike other immobilisers, it does not require a remote control or key fob to operate. It is deactivable through an app on the driver's smartphone. This is ideal when you have to hand your car to valet parking, or for maintenance without keys.

The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It was designed to be as simple and convenient to use as is possible, yet remains as secure as ever. This is accomplished by integrating the ghost 2 immobiliser cost-II with the vehicle's CAN data network. This means that there are no extra wires that could be concealed or easily found. It also comes with an inbuilt feature that lets you to disarm your Ghost-II by connecting it to the vehicle's Bluetooth, so you can go out and drive with no hassle.

OBD port hacking

OBD port hacking is the newest method being used by professional car thieves to steal cars. Thieves are able to access your vehicle's OBD port with little more than a laptop, an application, and a few cables which can be bought online for under PS50. Once they have access, they will be able to do anything they want including resetting your vehicle's fault codes, tuning your car, or stealing it within a matter of minutes.

If you have an Ghost immobiliser fitted it can protect your vehicle from theft with this method by requiring that an unique PIN code sequence is entered into your key fob in order to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. This is completely undetectable by any RF scanning technology or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without requiring a PIN code.

To utilize an OBD hacking device you require a laptop with software capable of reading the OBD protocol, which can be bought for less than PS100 on ebay or Amazon. You will also require a cable that has OBD pins connected to the CAN Bus. These cables are available on Amazon/Ebay around PS50. The cable must be spliced into the wiring harness of your car, such as the radio wiring harness.

Once the hacker has access to the OBD port on your vehicle, they will send diagnostics to the system at a high baud rates that will cause a crash of the car's CAN and stop the system from functioning. This can cause the engine to stop, doors to lock and even the brakes to be engaged.

No additional key fobs or remotes required.

The car immobiliser is a fantastic piece of anti-theft technology used by billions modern vehicles across the globe. An aftermarket immobiliser helps protect your vehicle by using engine ECU software that prevents cars from starting if the transponder is false.

It is possible for thieves in the event that they know the code that disables an immobiliser, to disable it. A burglar could easily remove the battery from many key fobs by squeezing them open. They could then use an easy tool to take out the circuit board inside an immobiliser and replace it with a blank. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet data loop in the CAN which is not detected by diagnostic tools like those used by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, which means it's inaccessible.

It is possible to disable Autowatch's Ghost 2 auto protection at certain times like valet parking or a service job. Ghost CAN immobilisers have a mode called 'Service Mode that is activated with a simple push of a button on your phone. The vehicle can still be operated, but its maximum speed will be limited to 36mph for added security.

If you'd like more information about the TASSA certified ghost immobiliser, please contact us today to book a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple change of PIN code

Ghost is a next-generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the steering wheel and dash. The system stops engine start and can't be bypassed because no RF signals are generated from the device. This makes it difficult to be detected by sophisticated RF scanning and code grabbing techniques employed by modern thieves.

The PIN code sequence can be changed anytime you want to block previous drivers and even includes an override code in the event of lost sequences. The installer will demonstrate the process to do this during installation. The system has a valet-mode feature that can be used to temporarily disable pin input sequences so that your garage or mechanic can service the vehicle without having to know the code. This is ideal for those who want to hand over their car to valet parking / service but don't want divulge the pin sequence.

In contrast to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the smartphone app, meaning no extra LED indications are thrown and your car is secure and safe from the possibility of being disabled by hackers or any other technology.

Tested for every vehicle

Ghost immobilisers, unlike key fobs that require pressing buttons, [Redirect-302] is hidden under the steering wheel or dash. It is not obvious that it's there. The device is connected to your vehicle's CAN network and a PIN code can be programmed using the buttons on your car. The system then prevents the engine from starting until this code has been entered first. This means that thieves cannot clone the keys of your vehicle or gain access to the OBD to hack into it.

ghost immobiliser price can be utilized in all vehicles including electric cars motorhomes, vans, and bikes. It's also incredibly versatile and can be programmed to shut down in various scenarios. It is possible to program it to enter Valet mode, for example when the vehicle is taken to a valet service or parking company. This permits you to drive within a 30mph speed limit, and the ghost immobiliser will activate itself when your vehicle returns to your possession.

Another excellent feature is that the device can be reset to your personal PIN code at any point. This is great if you lose the code, Tracker or in the event that the device becomes unusable.

It's also worth noting that the device is undetectable to anyone who isn't familiar with it. It works by running through the buttons that are already on your car's dashboard and steering wheel and uses the data they send to identify the buttons that have been pressed. This makes it a safe and solid security system that is not able to be altered by RF scanning, jamming, or door lock pick set.