• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to repair a damaged window handle with the proper tools. It's important to know the type of handle you have and the spindle's size before purchasing an alternative.

Older uPVC window handles have a spur that protrudes and Window Handle Replacement locks on the wedge striker for cockspur. They can be left or right-handed and need to match when replacing.

What type of lock and handle do I need?

There are many upvc window locks and handles each with their distinct advantages and functions. The type of handle you choose will determine whether or not your locking mechanism is efficient and if it is easy to open windows. With time and regular use the handles made of upvc on your windows may get worn out and damaged. This makes them less secure and effective. In some instances they might even disappear completely. If you find that your window handles have fallen off, it's important to fix them as soon as you can. This will help prevent burglaries, and keep your house secure.

It's a task that anyone can complete. You will need a few tools, but with the appropriate knowledge, it's simple and should only take a couple of minutes. To get started, you will need to determine the type of lock and handle you have on your window, which will help you identify the best replacement.

Inline Espagnolette Handles

These are the most common kind of upvc handle and are usually located on the other side of your window. They are flat in design and have a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles feature a spindle running through the middle of the handle into the window frame in order to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles are attached to the window frame by one screw, and are less secure than other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles in that they can be rotated for opening the window, and then lowered to the window to let air circulate. They feature a 7mm spindle at the back and are available both in right-hand and left-hand versions.

When buying replacement upvc handles it is essential to measure the spindle's length as not all are identical in size. To test the length of your upvc handle simply drop something into the middle of the hole and measure how far down it goes before meeting an obstruction. This is the length of the spindle that will be suitable for your window.

What is the spindle?

uPVC window handles function similarly like doors. By turning the handle, you can operate a latch within the frame. This unlocks the window so it can be closed and opened. However, sometimes handles can be damaged, especially when they are frequently used or exposed to extreme weather conditions. This can leave you needing to replace your uPVC handles on windows since they may not operate the window correctly anymore.

There are several different types of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. They are designed to fit into the uPVC frames in a variety of ways. Each handle uses a specific spindle to lock the mechanism fitted to the window. It is crucial to know the type of handle installed on your uPVC windows to ensure that you replace it with a suitable one.

The base section of the handle will inform the type of uPVC it is. There should be a "snap-in' cover over one screw that holds the handle base in place. Take it off and you should be able to see the second screw located at the opposite end of the base portion of the handle. Once both screws have been removed, you should be able pull the handle from the uPVC.

Once you have removed the uPVC window handle, you have to carefully unscrew the spindle you have removed from the locking mechanism. Make note of the length of the spindle as you will need to ensure that you purchase one that is the same length as your original handle and locking mechanism.

The primary issue with window handles made of uPVC is that the handle spindle gets worn out and can no longer work with the locking mechanism. This could be due to corrosion, damage due to frequent use, or an unreliable locking mechanism. If this happens, you'll have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

In the course of time and daily use, window handles may become damaged or broken and if this happens, it is crucial to repair them as quickly as possible to ensure the safety of your home. The good news is that replacing a damaged or worn handle is a fairly simple task that can be accomplished in just over one minute and doesn't require any specialized tools.

To remove the old handle, you must first remove the screw at the bottom of the handle. Once this is removed the handle will be removed from the base. A second screw will be situated at the base of the handle. This too can be removed. Once these two screws are removed, the handle will be detached from the window's base.

After removing the handle, align the fixing holes of the new handle with the holes that are already in the window frame. There might be a small sticker or caps on the new handle, so remove the caps if needed, and then put the handle in place. It is important to check that the handle is working after it is installed. Turn the handle over and make sure the lock mechanism is working.

Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over the frame's outer or the transom bar cross member inside the window.

Once you have installed the new handle, slide the spindle inside the window lock and tighten it. Once the handle is securely fixed in place, replace the'snap in' cover and screw cap (if applicable). The handle is now ready for use to use, so try opening and closing the window several times to ensure that it functions properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult, and the process is simple. All you need is a screwdriver, and a little bit of patience. First, make sure that the handle that you are replacing is unlocked. Then remove any screws visible. You can also replace them using screw caps. After the handle has been removed and you are ready to take a note of the length of the spindle which protrudes from the back of the handle. This is crucial as it will determine what type of handle you need to purchase.

Espagnolette handles on uPVC are the most sought-after kind of handle. The spindle passes through the handle to activate the locking mechanism in the frame of the window. When the handle is turned, it opens the latch on the window, allowing it to open. During regular use and time, handles for espagnolette may become damaged.

Cadenza handles are a different kind of uPVC window handle that is commonly used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are more secure than the espagnolette handles because they are able to open from the inside. You can replace upvc window handle them using the same procedure as you would do for handles made of espagnolette however, ensure that the new handle is angled and not flat.

After you have chosen the correct handle, simply align the new handle with the existing screw holes before screwing it in place. Then, you should put the screws on and test your new handle. This is done by shifting the handle from the locked to the unlocked position and the reverse direction a few times. It might be worthwhile to speak with an expert to see how you can fix any issues. They can offer advice on how to fix the issue in a timely and effective way.