• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and window repairs increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double glazing repairs-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to source some plastic spacers to assist the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor, where they could be trampled under.

It's a good idea to seal the gap after the glass is removed. This will keep water and drafts from entering your home until a professional is able to fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could develop a number of problems that include sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen. Most often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more severe instances, you may need to replace the window repair.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal rather than the frame. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze it could be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier to do if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain manner or because of improper installation in the factory. Sending us a photo via our website will often resolve the problem. We are happy to provide suggestions.

It is also crucial to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause gaps to develop between the sash and the frame. If they're beyond repair, it could be necessary to have them realigned. The interlock, which is on the hinge side of the window and can also be misaligned, and again it's possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and there may come a point where it is more economical to replace them than repair them. If you are experiencing issues with your Upvc window, it's best to consult an expert immediately.