• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons Your Fiat 500 Key Fob Won't Work

A key fob from Fiat 500 makes it simple to open doors and start your vehicle. There are a variety of reasons why the fob won't work. These include a dead battery or damage to the receiver module, water problems, and interference.

This listing is for an NEW replacement fiat 500 replacement key Flip Key Remote - look-alike Ilco brand that needs to be programmed professionally by a local locksmith (click here to search for a Locksmith Search). This remote includes lock, unlock and trunk buttons.

Dead Coin Battery

A dead battery is the main reason for your 500 key fob not functioning. Modern key fobs only have a limited range of operation and must be within a few inches of the vehicle to work. If you're not close to your vehicle and you press the key fob button the car won't respond and will display an "Key Fob Not Detected" message in the instrument cluster.

If this happens you need to replace the battery of your coin-cell (Part Number CR2032) by a fresh one of a trusted brand such as Panasonic Duracell or Energizer. You can usually find them at your local hardware store, or online.

After you've changed the battery on the coin cell, you can test it by standing close to your fiat punto remote key price 500 and pressing the buttons. The car will flash its parking lights and the key fob should work the lock and unlock switches.

If your key fob isn't working even after replacing the battery, it could be water damage that prevents it from interacting with the module in your vehicle. Water damage can happen in a number of ways, from small splashes to submerging the fob into salt water at the beach. If you suspect that your fob was exposed to water, try placing it in a dry rice bag to draw the moisture out. If this doesn't work your fob will probably need to be reset by an experienced auto locksmith or the dealer.

Water Damage

Damage to the water supply can occur if you submerge the fob in the ocean, or wash it in a washing machine. Saltwater can cause the circuit board to become shorted and eventually end up dying. It's not a good idea to let the fob get wet however, don't give it up in the event that you accidentally drop it in water or fail to remove it from your pocket.

First take the battery off the fob. Before replacing the battery, clean the electronic chip with isopropyl or similar products. Test the fob afterward to see if it is working. If the key does not function it could need to be programmed again. This is typically done by a dealer or professional auto locksmith.

If your key is a bit older and not programmed for your vehicle it is necessary to replace it completely. This is a straightforward process that can be completed by a professional locksmith for automotive use. The locksmith will need to cut the key to match the ignition on your vehicle. They'll also need to reprogram the fob for your car's system. This is a cheap and quick process that could be completed the same day.

Receiver Module Issues

One of the main reasons your 500 key fob might stop functioning is because it's out of range. The remote usually has 30 feet of range or less, and if it's too far away from your car it won't respond to your commands. This can easily be resolved by moving it closer to your vehicle until it begins responding.

If your fob isn't working after you replace the battery in the coin, also called a "button", "watch" or "button" or "button", it may be due to a malfunction on the circuit board inside. Reprogramming your fob can resolve this issue. You can find the instructions on how to do this for the majority of automobiles by searching YouTube or looking through the owner's manual.

It's possible that you need to replace the metal clips that keep the coin battery. If they lose tension it could hinder the battery from being properly seated and could cause your remote to malfunction.

In rare instances the fob might become desync'd with your vehicle due to software or hardware issues. This issue can be fixed by visiting your local auto-locksmith or dealer to reprogram your key fob. In some instances the software may require reinstallation to your body control modules.

Interference

In addition to a dead battery on a coin the key fob could not be able to receive or transmit a signal due to interference. This can occur when the keyfob is located in close proximity to a radio transmitter like a cellphone or Fiat Punto remote key price radar detector. The key fob may not work because of a problem to the buttons or water damage, or damage to the internal chips.

If your key fob suddenly stopped working, or you have tried everything at home to resolve it (e.g. You may have a faulty 500 receiver module if you've tried replacing the battery, reprogramming it, or using an alternative key fob. The receiver module is situated under the dash and receives the radio frequency signals from the key fob. It transforms the signals into electronic commands which are then processed by the vehicle.

Fortunately, there's an easy method to reset all on-board systems in your 500, including the key fob. Disconnect the battery for 15 minutes, removing first the negative cable and then the positive cable. Then reconnect the battery. This will erase any remaining electricity, and allow you to restart the car's computer. This can help you get your key fob working again. If the problem persists you should speak with an expert technician. They will be able diagnose the exact cause of problems.