• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. However when you have double glazed window repairs-pane windows that are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards fall onto the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you might think about the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you aren't able to move the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a fresh layer is applied. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double glazed window repairs near me-glazed glass, it is more likely the problem is with the seal than the frame. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be hinges at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is very easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also become misaligned due to wear, causing an opening where the sash meets frame. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to have them realigned or replaced. Second, the interlock can also become disaligned. This is located on the hinge side and might require to be cleaned. In some instances, it may be necessary to replace them.

The second most frequent cause of draughts is the window seals. These can become worn down or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and lessen draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some type of filler. They can be placed on top of your windowsill. They will help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them than to repair them. If you are having issues with your upvc windows, it's recommended to seek help from a professional immediately.