• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how old your Subaru is, you may need to have your key fob programmed by an automotive or dealer locksmith. This is done by connecting a computer-based programming machine to your car.

To program your Subaru to program, open the door on the driver's side by pressing the door button and close it. You will hear the chime sound and see the dome lights blink in the instrument panel.

Step 1: Locate the circuit board on your transmitter

There are several ways to program your key fob. You must first identify the kind of key fob you own. You can do this by inspecting the key fob's shape or by listening to the car's chime.

Once you have these details, you are able to begin the process of programming your key fob at home. To accomplish this, you'll require a metal key and a screwdriver that has a flathead. You can open the key fob by twisting it. Then push the key in and pull the battery from the small tabs that secure it. Replace the battery and put the case back together.

Step 2: Disconnect the key fob case

It is an ideal idea to change the batteries in key fobs in case they're not functioning. In some cases the buttons on the key fob can be damaged. If you notice that the contacts made of metal on the button are loose, try soldering them in place again in order to make them function again.

Make sure that you shut off your ignition and close your doors prior to you begin. Close the driver's side door and press the button 10 times in rapid succession. You should then hear the instrument panel chime and the dome light will flash. This indicates that you're ready to move on.

Step 3. Insert the fob of the key into the ignition

There are a lot of websites online that can give instructions on how to program a replacement or new reprogram subaru key key fob at home, but most of them are not very specific. Reprogramming a key that is electronic is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors shut. Use the door button to open all doors. Close and open the door to the driver's side two more times. Then, remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system should chirp to confirm that the settings have changed.

Step 4 Step 4: Switch on the ignition

Before you begin this process of key fob programming, it is important to keep in mind that this process only works if you own one working key already. If you don't then a dealer or auto-locksmith will have to program a key for your Subaru Fort Bliss.

Once the key is programmed, it will be in a position to start your vehicle within a matter of five minutes. To begin, ensure that all doors are shut and the engine is off. Then, sit in the driver's seat and unlock all doors with the door button control. Place the key into the ignition, turn it on to the first position (the electrical systems will come on, but the engine is off) then return to the off position ten times in rapid succession.

Step 5 5. Unlock the Driver's Door

Subaru provides a variety of high-end vehicles with key fobs that lock and unlock doors and even start the car and defrost the windows. These gadgets can sometimes stop working.

Find a locksmith or dealer to resolve the issue. This will resolve the issue and ensure that your vehicle is safe.

First, you must open and close the driver's door. Then, place the ignition key in and move it to the first position. Then, you can return it to the off position. Do this as fast as you can for ten times. After the tenth time you will hear a sound.

Step 6 Step 6: Press the Lock/Unlock key on the Driver's Door

The process to replace the battery in the subaru impreza key replacement remote key fob is very simple. Remove the fob's exterior case. Then, use a flathead screwdriver to pry open the inside of the case and then remove the battery.

After removing the battery, put in the new one and close the case. Relax in the driver's seat and then unlock all doors by using the door button control. Place the key in ignition and turn it so that the electrical system is switched on, but the engine is off. Repeat this 10 times in a line until you hear a chime on the instrument panel. This will turn the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

For some people, the annoying sound that is heard when locking and unlocking the Subaru key fob from outside the vehicle can become distracting. In some cases you can deactivate the chirp by closing and opening all doors by double-clicking the lock button on your key fob.

Close all doors including the fuel-filler lid, and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After that the instrument panel will emit an audible chime. The chirp signalizes that the lid for the fuel-filler and door are locked. The setting can be altered so that the lids and doors lock automatically without pressing a request switch.

Step 8: Enter the 8-Digit Transmission Number.

Keep the first 8 numbers in your mind. Once you're in the driver's seat, close the doors and turn the ignition to the first position. After 10 turns, the instrument panel should chime once.

The transmitter circuit board is in the key fob's case. There are usually one or two sets of numbers (8-digits) on the circuit board. Take note of the first sequence of numbers, and follow the directions in this guide to register the code with your vehicle's system. For older models, this process may require a visit the dealer.