• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how brand new your Subaru is, you might need to have your key fob programmed by an auto locksmith. This is usually done by connecting a computer to the car's computer.

To program your Subaru, start by unlocking the driver's side door using the door button control, and then close it. You will hear the chime sound and see the dome lights flash on the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are several ways to program your key fob. First, you must determine the type of key fob that you own. This can be accomplished by looking at the design of the key fob, or by listening for a buzz in your car.

Once you have this information, you can start the process of programming your key fob from home. You will need an aluminum flathead and a key to complete this. The key fob can be opened by twisting. Insert the key made of metal into the case and then release the battery by pushing the tabs holding it in place. replace subaru key fob the battery with a new one and then put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is a good idea to replace the battery in key fobs when they are not working. In some instances the buttons on the key fob could be broken. If you see that the metal contacts of the button are loosened Try soldering them into place again in order to make them function again.

Be sure to turn off your ignition and close your doors prior to you begin. Close the driver's side door and then press the door button 10 times in rapid succession. Then, you should hear the instrument panel chime, and your dome light will flash. This indicates that you are prepared to move forward.

Step 3: Insert the fob for the key into the ignition

There are numerous articles online that will give you instructions on how to program a replacement or new subaru impreza replacement key key fob at home, however most of them are not specifically formulated. Programming an electronic key is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors shut and the engine off. Use the door button to open all the doors. Open and close the driver's door two times more. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system will vibrate when the settings are changed.

Step 4 Step 4: Switch on the ignition

It is crucial to note that this method of programming a key fob only is effective if you have a working key. If not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once the key is programmed, it should be capable of starting your vehicle within a matter of five minutes. To begin, ensure that all doors are closed and the engine is turned off. Assume a seat in the driver's chair and unlock all doors by pressing the button for the door. Insert the key into the ignition and turn it off to the first position (the electrical systems will turn on but the engine remains off), and then back to the off position ten times in quick succession.

Step 5 Step 5: Unlock the Driver's Door

Subaru offers a variety of premium cars equipped with key fobs, which can lock and unlock the doors as well as start the car and defrost the windows. However, sometimes these gadgets stop working properly.

Find a locksmith or dealer to solve the issue. This will fix the problem and make sure that your car is safe.

It is necessary to first open and close the driver's side door. Place the key in ignition, and turn it until it is in position 1. Then, you can turn it back to the off position. Do this as quickly as you can, ten times. After the tenth repetition, you should hear an audible chime.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

If you need to replace the battery inside a subaru impreza key replacement key fob, the process is straightforward. First, open the exterior fob casing. Then then, use a flathead screwdriver to push open the inside of the case and take out the old battery.

After taking the battery out to replace it, you can replace it with the new one. Close the case. Sit in the driver's seat and unlock all doors using the door-button control. Place the key in ignition and turn the key to ensure that the electrical system is on, but the engine remains off. Repeat this 10 times until you hear a sound on the instrument panel. This will enter the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

For some people, the annoying sound heard when locking or unlocking the Subaru key fob from outside can be distracting. In some cases, you can disable the chirp by closing and opening all doors by double-clicking on the lock button on the key fob.

Switch the ignition off and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime once this is achieved. The chime signals that the fuel-filler lid and door are locked. The setting can be changed to make the doors and fuel-filler lid lock automatically without having to press a request switch.

Step 8 Step 8: Enter your 8-digit Transmitter Number

Keep the first 8 numbers in your mind. Now, sit in your driver's seat, shut all of the doors, and then turn the key back to the first position (towards towards). After 10 turns, your panel will chime once.

The transmitter circuit board is inside the key fob case. The circuit board will have one or two 8-digit numbers. Note the first number sequence and follow the steps in this guide to register the code on your vehicle's system. For older models, this procedure may require a visit the dealer.